PTCL Router Login & WiFi Password Change
Everything you need to get into your PTCL router settings: the right address for your modem, the default login, changing the WiFi password from your phone, and what to do when the login page won't open.
Which address does your router use?
PTCL has supplied many modem models over the years, and the login address depends on yours. Try them in this order:
| Your device | Address to try | Notes |
|---|---|---|
| Newer PTCL broadband modem | 192.168.10.1 | The usual address for modems installed in recent years |
| Older PTCL DSL modem | 192.168.1.1 | Same menus, older firmware |
| PTCL Flash Fiber ONT | Address on the ONT label | Huawei units often use 192.168.100.1 |
| PTCL Charji / EVO device | 192.168.1.1 | Login details are on the device label |
If neither address loads, the correct one is often printed on a sticker on the back or bottom of the router.
How to log in to your PTCL router
- Connect your phone or laptop to your PTCL WiFi, or plug a LAN cable into one of the modem's LAN ports.
- On a phone, switch mobile data off so the browser uses your WiFi — the router page is only reachable from inside your own network.
- Type
http://192.168.10.1into the browser's address bar (not the Google search box) and press Enter. If nothing loads, tryhttp://192.168.1.1. - Enter the admin username and password (see below). The status page opens, with menus such as Wireless, Advanced Setup and Management.
Default username and password
| Field | Common default |
|---|---|
| Username | admin |
| Password | admin — or the password printed on the router sticker (often the last five digits of the MAC address, with no dashes) |
Defaults vary by model and may have been changed during installation. If admin/admin doesn't work, check the sticker on the router itself. Never share your admin password with anyone you don't trust — it controls your whole network.
How to change the WiFi password
- Log in to the router as above.
- Open Wireless (or WLAN), then Wireless Security or Security Settings. Menu names vary slightly by model.
- Find the field labelled Pre-Shared Key, WPA Key or Password.
- Type a new password of at least 8 characters — mix letters and numbers — and click Apply or Save.
- Every device will disconnect. Reconnect each one with the new password.
If your router broadcasts separate 2.4 GHz and 5 GHz networks, change both — they have their own password fields. While you're in the settings, you can also rename the network (SSID) from the same Wireless menu.
See who's connected to your WiFi
Look for a Connected Devices, Client List or DHCP section in the router menu. It lists every device currently on your network by name or MAC address. If you see devices you don't recognise, change the WiFi password — that disconnects them — and check whether your speed improves. Unknown devices quietly eating bandwidth is a common cause of "my internet got slow for no reason".
The login page won't open
- Check you're on the right network. Your device must be connected to your PTCL WiFi or LAN cable — not mobile data, and not a neighbour's WiFi.
- Use the address bar, not search. Typing 192.168.1.1 into a search box runs a Google search instead of opening the router.
- Try the other address. If 192.168.10.1 fails, try 192.168.1.1, and vice versa.
- Restart the router. Switch it off for 30 seconds, then on again, and wait for the lights to settle.
- Try a different browser or device. A cached page or a browser extension occasionally blocks the local address.
Forgot the admin password?
The reset button is on the back of the modem — press and hold it with a pin for about 10 seconds, until the lights change, then let the modem restart. This restores the default admin login, but it also wipes your internet settings. On PTCL DSL that means the PPPoE connection, where the username is normally your PTCL landline number and the password comes from PTCL. If you don't have those details, call PTCL on 1218 before resetting, or you'll be offline until they give you the credentials.
Security tips
- Change the default admin password as soon as you log in — anyone on your network who knows the default can change your settings.
- Use WPA2 (or WPA3 if your router offers it) — never WEP, which is trivially breakable.
- Change your WiFi password every few months, and immediately if you suspect someone has it.
Frequently asked questions
What is the PTCL router login IP address?
Most newer PTCL modems use 192.168.10.1, while older DSL modems use 192.168.1.1. PTCL Flash Fiber ONTs (the small fibre box) use the address printed on their own label — Huawei units often use 192.168.100.1. If one address doesn't load, try the other.
What is the default PTCL router username and password?
On many PTCL routers both are "admin". If that is rejected, the password is often the last five digits of the router's MAC address (no dashes), printed on the sticker on the back or bottom of the router. If someone changed it and you don't know the new one, a factory reset restores the default — but it also wipes your internet settings.
How do I change my PTCL WiFi password from my mobile phone?
Connect your phone to your PTCL WiFi (not mobile data), open Chrome or Safari, and type 192.168.10.1 — or 192.168.1.1 on older modems — into the address bar. Log in, open Wireless / WLAN settings, enter the new password and save. Every device will need to reconnect with the new password.
Why won't 192.168.1.1 open?
The usual reasons: your device is on mobile data instead of the PTCL WiFi, you typed the address into a search box instead of the browser address bar, your router uses the other address (try 192.168.10.1), or the router needs a restart. Check the sticker on the router — some models print the correct address there.
Will changing my WiFi password make my internet faster?
Only if neighbours or unknown devices were using your WiFi. Check the connected-devices list in the router settings: if you see devices you don't recognise, changing the password and removing them can free up your bandwidth. If the list is clean, your speed problem is elsewhere — run a speed test to check.
Changed the password — is your speed back?
Run a test now and compare with your package speed.